- [polylang]
Security Network Platforms are designed and manufactured according to the requirements of TS EN 1263-1 norm.
While the platforms are mounted in their places on the construction site, they must be determined and mounted in accordance with the TS EN 1263-2 norm.
Safety nets are often used in the construction of high-rise, high-rise buildings, to protect workers and pedestrians in the vicinity from falling from height.
Security Platforms provide protection against falls from a height of 6 m up to 3.5 m or 4.0 m from the building facade.
Security Platforms are produced in the capacity to meet the requirements of TS EN1263 standard. Nets are 10 × 10 mesh, 6 mm thread thickness, edge rope thickness is 8 mm. It provides protection against falls up to a minimum distance of 3 m from the building facade.
Network Placement Limits
According to TS EN 1263-2 standard, the deployment limits for security networks are as follows:
– In areas with less than 20 ° inclined surfaces, the fall height should be maximum 6m.
– In areas with surfaces inclined more than 20 °, the drop height should be a maximum of 3 m.
The free distance (f) under the safety net should be at least the net height. There should not be any materials in this area that may be an obstacle.
Network Placement Limits
According to TS EN 1263-2 standard, the deployment limits for security networks are as follows:
– In areas with less than 20 ° inclined surfaces, the fall height should be maximum 6m.
– In areas with surfaces inclined more than 20 °, the drop height should be a maximum of 3 m.
The free distance (f) under the safety net should be at least the net height. There should not be any materials in this area that may be an obstacle.
