Each system has its own advantages and practicality.-TM Masa Kalıp-H Tower Scaffolding-Flanged Scaffolding-Cup Scaffolding-Prop Strut-Facade Scaffolding
We are proud to serve our contractors all over the world with our mold types. In fact, although each of the systems provides different advantages in itself, the most preferred industrial formwork system is WOODSTEEL today. Each system has separate concrete compressive strengths. Our project team is always on the safe side based on these values and eliminates all risks.
According to TS EN 1263-2 standard, the placement limits prescribed for safety nets are as follows. - In areas where surfaces with a slope less than 20 °, the height of the fall should be maximum 6m. The free distance (f) below the security net should be at least as high as the net height. There should not be any materials in this area that may constitute an obstacle.
Security Network Platforms are designed and manufactured according to the requirements of TS EN 1263-1 norm.
While the platforms are mounted in their places on the construction site, they must be determined and mounted in accordance with the TS EN 1263-2 norm.
Safety nets are generally used in the construction of high-rise, high-rise buildings, in order to protect employees and pedestrians in the vicinity from falling from height.
Security Platforms provide protection against falls from a height of 6 m up to 3.5 m or 4.0 m from the building facade.
Security Platforms are produced in the capacity to meet the requirements of TS EN1263 standard. Nets are 10 × 10 mesh, 6 mm thread thickness, edge rope thickness is 8 mm. It provides protection against falls up to a minimum distance of 3 m from the building facade.